Products
Bare Casting
AA Bare 2.0L Porsche 914 Casting 3 stud "Round...
AA Bare 2.0 Porsche 914/912E Head Casting. Build the performance Head of your needs. It Comes bar...
AA Bare 2.0 Porsche 914/912E Head Casting. Build the performance Head of your needs. It Comes bare with out Seats or Guides. Giving you the the ability to build any possible combo Stock or Street head you want. The AA 2.0L casting comes with the STD Porsche 2.0L combustion chamber. The STD Porsche 2.0L Spark Plug angle. Also equipped with a breather pipe and all the studs The head temp sensor boss is there but not tapped Please Note: The Exhaust Guild Hole is the same as the Intake 12mm, We d...
€395,95
Springs And Retainers
Dual High-Rev Valve Springs for VW Type 1, 2, a...
Brand new set of 8 Dual High-Rev Springs for increased RPM and Performance. Made from special sil...
Brand new set of 8 Dual High-Rev Springs for increased RPM and Performance. Made from special silicone spring steel. Prevent engine damage due to valve float or worn out weak valve springs. They can be used as intake/exhaust springs in almost any VW Type 1 head casting. Also Used as custom springs in Type 4 Heads with 8mm Valves ***Machine Work Required for installing the Inner spring.***
€52,95
Springs And Retainers
Hardened Valve Keepers Type 1, 2, & 3
Set of 8 Hardened Valve Keepers "Good for 1 head". They come with Standard three slot keeper groo...
Set of 8 Hardened Valve Keepers "Good for 1 head". They come with Standard three slot keeper grooves can be used as intake/exhaust valve keepers in almost any VW Type 1 head casting, Also Used as custom keepers in Type 4 Heads with 8mm Valves.
€14,95
Springs And Retainers
Inner High-Rev Valve Springs for VW Type 1, 2, ...
Brand new set of 8 Inner High-Rev Springs for increased RPM and Performance. Prevent engine damag...
Brand new set of 8 Inner High-Rev Springs for increased RPM and Performance. Prevent engine damage due to valve float or worn out weak valve springs. Made from special silicone spring steel. They can be used as intake/exhaust springs in almost any VW Type 1 head casting. Also Used as custom springs in Type 4 Heads with 8mm Valves Please note the is the Inner springs only they will not work by themselves. ***Machine Work Required for installing the Inner spring.***
€29,95
Clutch Covers
Kennedy Stage 1, Pressure Plate, Porsche 914 215mm
Kennedy Stage 1, Pressure Plate, Porsche 914 215mm
Kennedy Stage 1, Pressure Plate, Porsche 914 215mm
€364,95
Cylinder Heads and Components
Porsche 2.0L 914, Head KiType-4 EXH Studs, 3 IN...
Brand New Porsche 2.0L 914, Head Kit-4 EXH Studs, 3 IN Studs, 4 Rocker Studs Part#: 004 HS 198
Brand New Porsche 2.0L 914, Head Kit-4 EXH Studs, 3 IN Studs, 4 Rocker Studs Part#: 004 HS 198
€20,95
Clutch Covers
Sachs Pressure Plate 215mm Porsche 911/912E/914...
Sachs Pressure Plate 215mm Porsche 911/912E/914 (1965 to 1976) Part# 901 116 001 01
Sachs Pressure Plate 215mm Porsche 911/912E/914 (1965 to 1976) Part# 901 116 001 01
€275,95
Stock And Performance Type 4/ 914 Head AMC Series
Set of AA Type 4 Porsche 914 Heads 48 by 38 Val...
This is a brand new (Set of 2) Stage 2 Port and Polished High Performance Cylinder Heads for a VW...
This is a brand new (Set of 2) Stage 2 Port and Polished High Performance Cylinder Heads for a VW Type 4 & Porsche 914 1.8L Type 4 Bus. Heads comes with stainless steel 48mm intake and a stainless steel 38mm exhaust valves, with harden keepers, chromoly retainers, and dual high rev springs.They are ready to install. Made from an AA 2.0L type 4 casting using 8mm valve stems. The heads can also be opened to 103 to accommodate the larger bore sizes. Engine: VW Type 4 / Porsche 914 1.8L Spri...
€2.226,95 – €2.226,95 2 variants